Decouple cutover HF from portrait and tighten ops UI.

Portrait stays on biz-monitor; cutover create/ensure owns purpose=cutover_hf slots with project collect override, multi-interval bindings, window pause, and industrial detail UX. Also expand ZTE collect/config parsers and TextFSM for route/BGP/L2VPN/VRRP coverage.

Co-authored-by: Cursor <cursoragent@cursor.com>

web/src/i18n/zh.ts

@@ -253,6 +253,11 @@ const zh = {
     filterColumn: "筛选列",
     filterAllCols: "全部列",
     listFilterPh: "筛选网元 / IP / 厂商 / 状态",
+    purposeFilter: "任务用途",
+    purposeAll: "全部用途",
+    purposePortrait: "画像",
+    purposeCutoverHf: "割接高频",
+    colPurpose: "用途",
     colNe: "网元",
     colStatus: "状态",
     colLast: "最近采集",
@@ -365,7 +370,10 @@ const zh = {
       "每行一对：操作前接口,操作后接口（逗号/Tab/竖线分隔）。例：\ngei-0/1/1,gei-0/1/2\nxgei-0/1/0,xgei-0/2/0\n# 井号开头为注释。不是 A,B/C,D 这种斜杠分组。",
     mappingSaved: "映射已保存",
     mappingOptionalHint:
-      "可选。留空=忽略本端端口改名，按非接口 Key 对齐。填写后才做端口映射校验。",
+      "可选。留空=忽略本端端口改名，按非接口 Key 对齐。填写后才做端口映射校验。主接口映射会自动覆盖 .子接口（后缀不变）。",
+    ifaceNormalize: "接口归一化",
+    ifaceNormalizeHint:
+      "模板级规则，每行：简写,规范名。先归一化再端口映射。例：\nGE,gei\nSG,smartgroup\nXGE,xgei",
     createJob: "建立比对任务",
     defaultJobName: "割接比对",
     jobName: "名称",
@@ -469,46 +477,77 @@ const zh = {
     title: "割接监控",
     hint: "与业务对比独立：相对基线漂移 + 本批预期 + 老/新双端判定。复用采集任务与端口映射。",
     hintPort: "当前监控项：端口状态（interface_brief / admin·phy·prot）。选基线 → 勾选本批端口 → 判定看板。",
-    hintShort: "监控模板定判定规则；绑老/新采集与双基线 → 勾预期 → 看板评估。",
+    hintShort: "选老/新设备与监控模板，创建后自动高频采集；基线来自业务监控画像。",
     create: "创建任务",
-    createHint: "先填任务名并绑定老/新业务监控采集任务；映射与基线可稍后在详情里补。",
-    createHintShort: "任务名 + 老/新采集任务即可创建；模板、映射、基线可稍后补。",
+    createHint:
+      "除画像基线外，整条割接流程在本页完成；创建后自动生成业务监控高频任务并按计划执行。",
+    createHintShort:
+      "选老/新设备 → 监控模板与采集项 → 周期/窗口 → 基线（画像）→ 端口映射 → 创建。后台自动建高频任务。",
+    pickOldNe: "老设备",
+    pickNewNe: "新设备",
+    pickNe: "选择设备",
+    pickNeHint: "点击选择网元",
+    hideNePicker: "收起列表",
+    nePairReady: "老/新设备已选好，可进入下一步；点击上方卡片可重新选择。",
+    needNePair: "请填写任务名并选择老/新设备",
+    needProjectName: "请填写任务名称",
+    needMonitorTemplate: "请选择监控模板",
+    needMetrics: "请至少勾选一项监控项",
+    noPortraitBaseline: "该设备尚无画像采集任务或批次，请先在业务监控跑通画像后再选基线（可稍后补）。",
+    baselineOptionalHint: "基线可稍后在详情里补；有画像批次时可在此直接选定。",
+    metricInterval: "分项周期(秒)",
+    metricIntervalOptional: "分项周期（可选）",
+    metricIntervalHint: "留空则使用上方全局周期；填写后该监控项会单独建高频任务。",
+    scheduleHint: "按本机时间填写窗口，入库为 UTC；窗口外调度器自动暂停高频任务。",
+    sectionSchedule: "采集周期与窗口",
+    sectionBaseline: "基线与映射",
+    sectionDevices: "老 / 新设备",
+    sectionMetrics: "监控项",
+    createSteps: "创建步骤",
+    stepDevices: "设备",
+    stepTemplate: "模板",
+    stepSchedule: "周期",
+    stepBaseline: "基线",
+    next: "下一步",
+    back: "上一步",
+    colHf: "高频",
+    hfReady: "已建",
+    hfMissing: "未建",
     showCreateMore: "更多：模板 / 映射 / 基线",
     hideCreateMore: "收起更多",
-    setupHintShort: "采集任务创建后固定；此处配置监控模板、映射与双基线。",
+    setupHintShort: "画像任务用于基线；高频任务用于窗口内采集。此处配置模板、采集项、窗口与双基线。",
     createProject: "创建任务",
     projectName: "任务名称",
-    projectNamePh: "例如：CN1/CN2 第1夜割接",
+    projectNamePh: "例如：PE-A / PE-B 割接-1",
     sectionName: "1. 任务名称",
     sectionTasks: "2. 绑定采集任务（必填）",
     sectionTasksHint: "分别选择老设备、新设备上的业务监控任务；两侧不能为空。",
     sectionOptional: "3. 监控模板、映射与基线（可选）",
-    sectionOptionalHint: "可先跳过，创建后再到「基线配置」里设置。未选监控模板时默认绑端口割接监控。",
+    sectionOptionalHint: "可先跳过，创建后再到「基线配置」里设置。未选监控模板时使用系统默认。",
     sectionPair: "已绑定采集任务",
     sectionPairHint: "采集任务在创建时绑定；此处可调整监控模板、映射与基线。",
-    sectionBaseline: "基线批次",
     sectionBaselineHint: "老侧与新侧基线均必填；老侧用于列出本批预期对象，新侧参与双端判定。",
     optionalNone: "不选",
     monitorTemplate: "监控模板",
-    monitorTemplateHint: "决定对比哪些 metric 与双端成功语义；默认端口割接监控。",
+    monitorTemplateHint: "决定对比哪些 metric 与双端成功语义；默认绑定系统默认监控模板。",
     compareTemplate: "对比模板",
     compareTemplateBound: "绑定对比模板：{{name}}",
     portMappingHint:
       "有映射时，带接口字段的监控项只比映射内的口（这些口必须在割接后出现）。映射外的同名口不参与迁移对比；老口 down、新口同名 up 记为异常。未配映射则按同名直比。BGP/PW 仍用本批预期勾选。",
     baselineNeedTask: "请先选择对应采集任务",
     baselinePickHint: "从该任务的历史采集批次中选择",
-    oldTask: "老设备采集任务",
-    newTask: "新设备采集任务",
+    oldTask: "老设备画像任务",
+    newTask: "新设备画像任务",
     portMapping: "端口映射",
     oldBaseline: "老设备基线批次",
     newBaseline: "新设备基线批次",
-    needProjectFields: "请填写任务名并选择老/新采集任务",
+    needProjectFields: "请填写任务名并选择老/新画像任务",
     needExpectPorts: "请先勾选本批预期迁移的对象",
-    needBaselineFirst: "请先保存老设备基线批次，才能列出预期对象",
+    needBaselineFirst: "先设基线",
     needBothBaselines: "请先保存老、新两侧基线批次后再评估",
     errOldBaselineRequired: "缺少老设备基线批次",
     errNewBaselineRequired: "缺少新设备基线批次",
-    needBizStateTasks: "尚无业务监控任务，请先创建：",
+    needBizStateTasks: "尚无业务监控（画像）任务，请先创建：",
     projectCreated: "任务已创建",
     projects: "任务",
     empty: "暂无割接任务。",
@@ -533,20 +572,20 @@ const zh = {
     tabSetup: "基线配置",
     tabBatches: "割接批次",
     tabBoard: "判定看板",
-    saveBaseline: "保存基线/映射/模板",
+    saveBaseline: "保存配置",
     baselineSaved: "基线已保存",
-    pickExpectPorts: "本批预期对象（来自老基线）",
-    portFilterPh: "筛选对象 / 描述",
-    emptyBaselinePorts: "基线中无对应 metric 数据（确认监控模板与采集任务已勾选相应 profile）",
+    pickExpectPorts: "本批预期",
+    portFilterPh: "筛选",
+    emptyBaselinePorts: "基线无数据",
     batchLabel: "批次标签",
     defaultBatchLabel: "第N晚",
     expectPorts: "本批预期端口（老侧）",
     expectPortsPh: "逗号或换行分隔",
-    createBatch: "新建批次",
+    createBatch: "新建",
     batchCreated: "批次已创建",
     batches: "批次",
-    startBatch: "本批开始",
-    finishBatch: "本批完成",
+    startBatch: "启动",
+    finishBatch: "收工",
     evaluate: "立即判定",
     evaluated: "判定完成",
     statusUpdated: "状态已更新",
@@ -554,12 +593,12 @@ const zh = {
     metricPort: "端口状态",
     progress: "进度",
     anomaly: "异常",
-    onlyExpect: "仅看预期对象",
+    onlyExpect: "仅预期",
     onlyExpectHint: "默认显示全部漂移；勾选后只看本批预期",
     pinCurrentBatches: "当前采集批次",
-    pinOldBatch: "老侧当前批",
-    pinNewBatch: "新侧当前批",
-    pinLatest: "自动最新成功批",
+    pinOldBatch: "老侧当前",
+    pinNewBatch: "新侧当前",
+    pinLatest: "最新",
     runHistory: "判定历史",
     runLatest: "最新一次",
     colRuleHit: "命中规则",
@@ -568,6 +607,31 @@ const zh = {
     colMetric: "监控项",
     colKey: "对象",
     colPort: "老侧端口",
+    openRedChip: "红单 {{n}}",
+    metaPortrait: "画像",
+    metaHf: "HF",
+    metaBaseline: "基线",
+    baselineOk: "已设",
+    baselineMissing: "缺",
+    needBaselineFirst: "先设基线",
+    enableHighfreq: "开启高频",
+    highfreqReady: "高频已就绪",
+    collectNow: "立即采集",
+    collectTriggered: "已触发采集",
+    openBizState: "业务监控",
+    hfNotBound: "未绑定",
+    projectCollectMetrics: "采集项",
+    hfInterval: "周期(秒)",
+    hfStart: "开始",
+    hfEnd: "结束",
+    markProjectDone: "完成并停HF",
+    confirmProjectDone: "确认完成项目并暂停全部高频？",
+    projectMarkedDone: "已完成，高频已停",
+    deleteProject: "删除",
+    confirmDeleteProject: "确认删除项目？将停高频并清批次记录。",
+    projectDeleted: "已删除",
+    acceptPassedShort: "通过",
+    acceptFailedShort: "未过",
     colMapped: "映射新口",
     colDesc: "描述",
     colOldPort: "老端口",
@@ -586,27 +650,38 @@ const zh = {
     verdictNotInvolved: "未涉及",
     verdictUnexpected: "意外新增",
     verdictOk: "正常",
-    enableHighfreq: "开启高频采集",
-    highfreqHint:
-      "按当前监控模板的 collect_metric_ids（空则取对比模板全量）为老/新设备各建或复用高频采集任务并勾选对应 profile。",
-    highfreqReady: "高频采集任务已就绪（已绑定到本任务）",
-    collectNow: "立即采集老+新",
-    collectTriggered: "已触发采集",
-    openBizState: "打开业务监控",
-    boundTasks: "当前绑定采集任务",
-    acceptTitle: "本批验收小结",
-    acceptPassed: "本批验收通过",
-    acceptFailed: "本批验收未通过（红单 {{n}}，可带红开下一批）",
-    acceptPassedShort: "通过",
-    acceptFailedShort: "未通过",
-    newBaselineMissingBanner: "这些表没有可用的新侧基线内容，判定不可信：{{metrics}}",
-    acceptCarryHint: "验收不过不拦截：可新建下一批继续；红单保留留痕，可手动关闭。",
-    openRedHint: "任务仍有 {{n}} 条未关闭红单（带红继续）",
-    redTitle: "红单留痕",
+    highfreqHint: "",
+    boundTasks: "绑定任务",
+    oldPortraitTask: "老画像",
+    newPortraitTask: "新画像",
+    oldHfTask: "老HF",
+    newHfTask: "新HF",
+    projectCollectHint: "",
+    hfWindowInactive: "高频窗口未到/已结束，或项目已完成，当前不可采集",
+    baselinePortraitOnly: "",
+    collectSkipped: "未采",
+    collectSkippedBanner: "未采：{{metrics}}",
+    currentMissing: "缺当前",
+    currentMissingBanner: "缺当前批次：{{metrics}}",
+    highfreqReadyInactive: "高频已绑定（窗口未开，未立即采集）",
+    collectPartial: "部分失败（成功 {{ok}} / 失败 {{fail}}）",
+    confirmProjectDone: "确认完成项目并暂停全部高频？",
+    projectMarkedDone: "已完成，高频已停",
+    confirmDeleteProject: "确认删除项目？将停高频并清批次记录。",
+    projectDeleted: "已删除",
+    errMetricNeedsBindings: "监控项「{{metric}}」需要参数绑定（{{params}}），割接高频暂不支持，请去掉该项",
+    errNoProfileForMetric: "监控项「{{metric}}」在当前设备厂商下无可用采集 profile",
+    acceptTitle: "本批验收",
+    acceptPassed: "验收通过",
+    acceptFailed: "验收未过（红单 {{n}}）",
+    newBaselineMissingBanner: "缺新基线：{{metrics}}",
+    acceptCarryHint: "可带红开下一批",
+    openRedHint: "红单 {{n}}",
+    redTitle: "红单",
     redOpen: "未关闭",
     resolveRed: "关闭",
-    redResolved: "红单已关闭",
-    batchCreatedWithRed: "批次已创建（当前有 {{n}} 条未关闭红单，允许带红继续）",
+    redResolved: "已关闭",
+    batchCreatedWithRed: "已建批（红单 {{n}}）",
     colStatus: "状态",
     verdictUnfinished: "未完成",
   },
@@ -626,7 +701,7 @@ const zh = {
     listFilterPh: "筛选名称 / 对比模板 / 备注",
     kpiTotal: "模板数",
     colName: "名称",
-    namePh: "例如：端口+BGP 割接监控",
+    namePh: "例如：状态割接监控",
     colCompare: "对比模板",
     colCollect: "高频采集项",
     colNote: "备注",
@@ -634,6 +709,13 @@ const zh = {
     needName: "请填写名称",
     defaultsInvalid: "defaults JSON 无效",
     overridesInvalid: "sheet_overrides JSON 无效",
+    exportTemplate: "导出",
+    importTemplate: "导入",
+    templateExported: "模板已导出",
+    templateImported: "模板已导入",
+    templateImportInvalid: "导入文件无效：需要 name 与 compare_template_id（或 compare_template_name）",
+    templateImportHint: "导入/导出 JSON，便于私下传递监控模板（不含任务/批次数据）",
+    templateImportCompareMissing: "未找到对应对比模板，请先导入或创建同名对比模板",
     formHint: "先选对比模板 → 出现与对比模板相同的表页签 → 为每张表配置成功条件。",
     compareHint: "决定有哪些表以及 Key/比对字段；此处只配置双端判定。",
     pickCompare: "选择对比模板…",
@@ -809,7 +891,7 @@ const zh = {
     prev: "上一步",
     next: "下一步",
     fieldTitle: "任务名称",
-    titlePh: "例如：接入侧上联",
+    titlePh: "例如：上联链路组",
     titleRequired: "请填写任务名称",
     portsRequired: "请至少选择一个接口",
     interval: "周期（秒）",
@@ -2423,7 +2505,7 @@ const zh = {
     sourceTopology: "拓扑占位",
     sourceWebcrt: "WebCRT",
     regexTitle: "正则查找",
-    patternPh: "正则，如 ^CORE- 或 -BJ-",
+    patternPh: "正则，如 ^CORE- 或 -EDGE-",
     fieldName: "名称",
     fieldNameIp: "名称+IP",
     findMatches: "查找匹配",