Tighten cutover verdicts and scope iface metrics by port mapping.

Mapped interfaces are the expect set and must appear after cutover; unmapped same-name down/up is anomaly. Success presets no longer treat bare unchanged as green.

Co-authored-by: Cursor <cursoragent@cursor.com>

web/src/i18n/en.ts

@@ -288,8 +288,16 @@ const en = {
     stepPickMetrics: "① Pick metrics",
     stepConfigRules: "② Configure compare rules",
     pickMetricsHint: "Check metrics to add. Then configure each sheet below.",
-    noMetricsYet: "Select at least one metric above",
+    pickMetricsHintShort: "Click to add/remove; switch sheets in the left list below.",
+    showMetrics: "Show metric picker",
+    hideMetrics: "Hide metric picker",
+    noMetricsYet: "Select at least one metric first",
     selectedCount: "{{n}} selected",
+    tabFields: "Field rules",
+    tabFilters: "Row filters",
+    fieldsHintShort:
+      "Key aligns rows; Compare fields take part in value diff; empty compare = presence-only.",
+    tagCompareN: "{{n}} cmp",
     colFields: "Fields",
     keyFields: "Key",
     ifaceFields: "Interface",
@@ -301,7 +309,7 @@ const en = {
     modeEq: "Exact equal",
     modeNumeric: "Abs delta",
     modePercent: "Relative %",
-    normalizeField: "Normalize",
+    normalizeField: "Norm",
     ignoreFields: "Ignore",
     field: "Field",
     note: "Note",
@@ -312,12 +320,17 @@ const en = {
     rowFilters: "Row filter rules",
     rowFiltersHint:
       "Filter rows before compare. Conditions in a group are AND; groups are OR. Selecting ARP seeds editable default rules you can change.",
-    rowFiltersEmpty: "No filters → compare all rows. Add a condition group to start.",
-    filterClear: "Clear rules",
+    rowFiltersHintShort: "AND in group · OR across groups · empty = all rows",
+    rowFiltersEmpty: "No filters → compare all rows.",
+    filterClear: "Clear",
     filterAddOr: "Add group (OR)",
     filterAddAnd: "Add condition (AND)",
+    filterAddOrShort: "+ OR group",
+    filterAddAndShort: "+ AND",
     filterRemoveGroup: "Remove group",
+    filterGroupN: "Group {{n}}",
     filterOr: "OR",
+    filterAnd: "AND",
     filterField: "Field",
     filterOp: "Op",
     filterValue: "Value",
@@ -455,8 +468,13 @@ const en = {
     hint: "Separate from business compare: baseline drift, expect set, dual-device verdict. Reuses collect tasks and port mappings.",
     hintPort:
       "Metric focus: port status (interface_brief / admin·phy·prot). Baseline → pick ports → evaluate board.",
+    hintShort: "Monitor template sets rules; bind collect + dual baselines → expect → evaluate board.",
     create: "Create task",
     createHint: "Name the task and bind old/new business-monitor collect tasks. Mapping and baselines can be set later.",
+    createHintShort: "Name + old/new collect tasks; template, mapping, baselines can come later.",
+    showCreateMore: "More: template / mapping / baselines",
+    hideCreateMore: "Hide more",
+    setupHintShort: "Collect tasks are fixed at create; set monitor template, mapping and dual baselines here.",
     createProject: "Create task",
     projectName: "Task name",
     projectNamePh: "e.g. CN1/CN2 night-1 cutover",
@@ -469,23 +487,27 @@ const en = {
     sectionPair: "Bound collect tasks",
     sectionPairHint: "Collect tasks are fixed at create time; adjust monitor template, mapping and baselines here.",
     sectionBaseline: "Baseline batches",
-    sectionBaselineHint: "Old baseline feeds the expected-object picker; new baseline is optional.",
+    sectionBaselineHint: "Both old and new baselines are required; old lists expect objects, new feeds dual-side verdict.",
     optionalNone: "None",
     monitorTemplate: "Monitor template",
     monitorTemplateHint: "Chooses which metrics to compare and dual-side success semantics. Defaults to port cutover.",
     compareTemplate: "Compare template",
     compareTemplateBound: "Bound compare template: {{name}}",
-    portMappingHint: "From Business compare port mappings; leave empty if none yet.",
+    portMappingHint:
+      "With a mapping, iface metrics compare only mapped ports (they must appear after cutover). Same-name ports outside the map are not a migration; old down + new up is an anomaly. No mapping means same-name compare. BGP/PW still use the batch expect set.",
     baselineNeedTask: "Select the matching collect task first",
     baselinePickHint: "Choose from that task’s collect batches",
     oldTask: "Old-device collect task",
     newTask: "New-device collect task",
     portMapping: "Port mapping",
     oldBaseline: "Old baseline batch",
-    newBaseline: "New baseline batch (optional)",
+    newBaseline: "New baseline batch",
     needProjectFields: "Enter a name and pick old/new collect tasks",
     needExpectPorts: "Select at least one expected object for this batch",
     needBaselineFirst: "Save an old baseline batch first to list expect objects",
+    needBothBaselines: "Save both old and new baseline batches before evaluating",
+    errOldBaselineRequired: "Old baseline batch is required",
+    errNewBaselineRequired: "New baseline batch is required",
     needBizStateTasks: "No business-monitor tasks yet. Create one first:",
     projectCreated: "Task created",
     projects: "Tasks",
@@ -534,6 +556,15 @@ const en = {
     progress: "Progress",
     anomaly: "Anomaly",
     onlyExpect: "Expected objects only",
+    onlyExpectHint: "Shows all drift by default; check to filter to this batch's expect set",
+    pinCurrentBatches: "Current collect batches",
+    pinOldBatch: "Old current batch",
+    pinNewBatch: "New current batch",
+    pinLatest: "Auto latest success",
+    runHistory: "Run history",
+    runLatest: "Latest run",
+    colRuleHit: "Rule hit",
+    mappingBound: "Mapping saved and bound to this project",
     allMetrics: "All metrics",
     colMetric: "Metric",
     colKey: "Object",
@@ -548,6 +579,7 @@ const en = {
     colNew: "New",
     colVerdict: "Verdict",
     emptyDiffs: "No rows yet — run Evaluate",
+    emptyRed: "No red tickets",
     verdictMigrated: "Migrated",
     verdictMigrating: "Migrating",
     verdictLost: "Lost",
@@ -568,6 +600,7 @@ const en = {
     acceptFailed: "Batch acceptance failed ({{n}} red tickets; you may continue)",
     acceptPassedShort: "Passed",
     acceptFailedShort: "Failed",
+    newBaselineMissingBanner: "These sheets have no usable new baseline rows; verdicts are unreliable: {{metrics}}",
     acceptCarryHint: "Failure does not block the next batch; red tickets stay until resolved.",
     openRedHint: "{{n}} open red ticket(s) on this task (carry allowed)",
     redTitle: "Red tickets",
@@ -602,7 +635,7 @@ const en = {
     needName: "Name is required",
     defaultsInvalid: "Invalid defaults JSON",
     overridesInvalid: "Invalid sheet_overrides JSON",
-    formHint: "Pick a compare template → same sheet tabs appear → configure status fields and success patterns per sheet.",
+    formHint: "Pick a compare template → same sheet tabs appear → set success conditions per sheet.",
     compareHint: "Owns which sheets and Key/compare fields; here you only set dual verdict rules.",
     pickCompare: "Pick compare template…",
     openCompare: "Manage compare templates",
@@ -621,26 +654,85 @@ const en = {
     ooeIgnore: "Ignore (always not involved)",
     sheetRules: "Per-sheet migrate rules",
     applyAllPresets: "Apply recommended presets to all",
+    applyAllPresetsShort: "All presets",
+    sheetsUnit: " sheets",
     sheetHowReadonly: "Compare template (read-only)",
     iface: "Interface",
     compare: "Compare",
     presenceOnly: "presence only",
-    editInCompare: "Edit HOW in compare templates",
-    presetAuto: "Apply recommended preset",
-    presetSkip: "Skip dual verdict",
+    editInCompare: "Edit HOW",
+    presetAuto: "Recommended",
+    presetSkip: "Skip sheet",
     skipDual: "Skip dual for this sheet",
-    skipDualHint: "This sheet is skipped in cutover evaluate (use a compare job for pure value checks).",
-    statusFields: "Status fields",
-    statusFieldsHint: "Classify current rows as up/down; ports use admin/phy/prot, BGP uses state.",
+    skipDualHint: "Skipped in cutover evaluate (use a compare job for counters).",
+    statusFields: "Fields used for up/down",
+    statusFieldsHint: "Ports: admin/phy/prot; BGP: state; ARP: leave empty (presence only).",
+    statusOptionalHint: "With no status fields, only presence (gone/added) is used.",
     downValues: "Down values",
     upValues: "Up values",
     noFields: "No fields (pick metrics on the compare template first)",
-    successPatterns: "Success patterns (old any-of × new any-of)",
-    successPatternsHint: "e.g. port: old removed/down + new added/up; ARP: old removed + new added; BGP: old down(idle) + new up(established).",
-    oldSideAny: "Old side (any match)",
-    newSideAny: "New side (any match)",
-    addSuccessRow: "Add success pattern",
+    successPatterns: "Success rules (old OR-groups × new OR-groups)",
+    successPatternsShort: "Success",
+    successPatternsHint:
+      "Presence is whether the row exists. Value change binds a field and a strategy. AND inside a group, OR between groups.",
+    successPatternsHintShort: "AND in group · OR across groups · old+new both match ⇒ success",
+    successPatternsHintFree:
+      "Each side has two condition kinds: presence (no field) or value change (must bind a field). Inside a group everything must match (AND). Between groups, any group is enough (OR).",
+    anomalyPatternsShort: "Anomaly",
+    anomalyPatternsHint:
+      "Same shape as success. Match ⇒ red. Check “don’t care” on one side to watch only the other (e.g. new-side gone/down). Not-yet-success is still migrating, not anomaly.",
+    anomalyPatternsHintShort: "Success first; then anomaly. Don’t-care watches one side. Mid-state ≠ anomaly.",
+    successRow: "Success {{n}}",
+    anomalyRow: "Anomaly {{n}}",
+    removeRow: "Remove",
+    oldSideAny: "Old",
+    newSideAny: "New",
+    groupLogicHint: "AND inside a group, OR between groups",
+    sideDontCare: "Don’t care this side",
+    sideDontCareHint: "Judged by the other side only.",
+    groupN: "Group {{n}}",
+    addAnd: "Add to this group (AND)",
+    addOr: "Add another group (OR)",
+    addAndShort: "+ AND",
+    addOrShort: "+ OR group",
+    addSuccessRow: "+ Success rule",
+    addAnomalyRow: "+ Anomaly rule",
+    modeAny: "Match any",
+    modeAll: "Match all",
+    addCond: "Add condition",
+    pickField: "Pick field…",
+    condValue: "Value",
+    opEmpty: "empty",
+    opNotEmpty: "not empty",
+    opChanged: "changed vs baseline",
+    opUnchanged: "same as baseline",
+    op_eq: "equals",
+    op_ne: "not equals",
+    op_in: "in",
+    op_not_in: "not in",
+    op_empty: "empty",
+    op_not_empty: "not empty",
+    op_changed: "changed vs baseline",
+    op_unchanged: "same as baseline",
+    and: "and",
+    groupPresence: "Presence",
+    groupValue: "Value change",
+    groupStatus: "Status class",
+    groupField: "Field condition",
+    tokRemoved: "Gone",
+    tokAdded: "Added",
+    tokUnchanged: "Unchanged",
+    tokChanged: "Changed",
+    tokUp: "up",
+    tokDown: "down",
+    tokOther: "other",
+    or: "or",
+    tagSkip: "skip",
+    tagRules: "{{n}}",
+    tagEmpty: "empty",
     needCompareFirst: "Pick a compare template that has sheets first.",
+    showMore: "More: note / HF collect / JSON",
+    hideMore: "Hide more",
     showJson: "Advanced: edit JSON",
     hideJson: "Back to visual editor",
   },