feat(ne): connect detail, Huawei/Cisco hop, Cisco hostname probe

Persist full connect test logs (connect_detail) with NE UI detail modal.
Add Huawei/Cisco jump CLI templates and generic CLI hop session path.
Probe Cisco hostname via show configuration | include hostname (60s timeout).

Co-authored-by: Cursor <cursoragent@cursor.com>

web/src/i18n/zh.ts

@@ -162,7 +162,11 @@ const zh = {
       run: "连通性测试",
       running: "测试中…",
       submitted: "已提交 {{n}} 台设备测试",
+      retest: "重新测试",
     },
+    connectDetail: "详情",
+    connectDetailTitle: "连通性测试日志",
+    connectDetailEmpty: "暂无日志。请先执行连通性测试；失败时会记录完整错误与跳板上下文（不含密码）。",
     importResult: {
       done: "导入完成：新增 {{inserted}}，更新 {{updated}}，失败 {{failed}} 行",
     },
@@ -186,21 +190,34 @@ const zh = {
       enable: "经跳板登录目标网元",
       vendor: {
         zte: "ZTE 设备（CLI 跳登）",
+        huawei: "华为设备（CLI 跳登）",
+        cisco: "思科设备（CLI 跳登）",
         linux: "Linux 服务器（SSH 隧道）",
       },
       zteHint: "在 ZTE 设备上执行 ssh/telnet 命令跳转到目标，目标账号由二次认证输入。",
+      huaweiHint: "在华为设备上执行 telnet / stelnet（SSH）跳登；stelnet 即 SSH。目标账号由二次认证输入。",
+      ciscoHint: "在思科设备上执行 ssh -vrf / telnet /vrf 跳登，目标账号由二次认证输入。",
       linuxHint: "先 SSH 登录 Linux 跳板，经 direct-tcpip 隧道连接目标 IP:端口（等同 ProxyJump）。",
       host: "跳板地址",
       port: "跳板端口",
       protocol: "跳板协议",
+      protocolSshStelnet: "ssh（stelnet）",
       username: "跳板用户名",
       password: "跳板密码",
       vrf: "管理 VRF（可选）",
+      vpnInstance: "VPN-Instance（可选）",
+      vrfCisco: "VRF（可选，如 MGMT）",
       commandTemplate: "跳登命令模板",
       templateHint:
         "ZTE 常用：telnet {target_ip}、telnet {target_ip} vrf {vrf}、ssh {target_ip}、ssh {target_ip} vrf {vrf}。按跳板协议与 VRF 自动推荐；留空时后端同样规则。目标账号密码由二次认证提示输入。",
+      templateHintHuawei:
+        "华为常用：telnet {target_ip}、telnet vpn-instance {vrf} {target_ip}、stelnet {target_ip}、stelnet {target_ip} -vpn-instance {vrf}。SSH 协议对应 stelnet。留空时按协议与 VPN-Instance 自动推荐。",
+      templateHintCisco:
+        "思科常用：ssh {target_ip}、ssh -vrf {vrf} {target_ip}、telnet {target_ip}、telnet {target_ip} /vrf {vrf}。留空时按协议与 VRF 自动推荐。",
       badge: {
         zte: "ZTE跳板",
+        huawei: "华为跳板",
+        cisco: "思科跳板",
         linux: "Linux跳板",
       },
       hostRequired: "请填写跳板地址",