const zh = {
  common: {
    help: "帮助说明",
    refresh: "刷新",
    refreshing: "刷新中…",
    query: "查询",
    clearFilters: "清除筛选",
    prevPage: "上一页",
    nextPage: "下一页",
    perPage: "{{n}}/页",
    pagerMeta: "共 {{total}} 条 · 第 {{page}}/{{pages}} 页",
    opFailed: "操作失败",
    empty: "-",
  },
  workbench: {
    title: "工作台",
    backToWorkbench: "返回工作台",
    openInNewTab: "在新标签页中打开",
    openModule: "打开或切换到该模块页签",
    monitoring: "监控",
    operations: "运维",
    system: "系统管理",
    cards: {
      umeSync: "UME同步",
      umeSyncDesc: "UME 告警同步、订阅与清单",
      network: "网络管理",
      networkDesc: "网元清单、告警、配置同步与监控任务",
      managedNe: "网元管理",
      managedNeDesc: "多厂商 SSH/Telnet 网元与连通性测试",
      collect: "批量采集",
      collectDesc: "对已连通网元执行定制 CLI 命令并保存日志",
      webcrt: "WebCRT",
      webcrtDesc: "浏览器内交互登录已连通网元（SSH/Telnet）",
      topology: "拓扑管理",
      topologyDesc: "拖拽编排网元拓扑，支持 LLDP/CDP 发现链路",
      portTrafficWall: "流量大屏",
      portTrafficWallDesc: "独立页签打开命名流量大屏",
      users: "用户管理",
      usersDesc: "管理员添加、禁用用户并重置密码",
      audit: "操作审计",
      auditDesc: "查看登录与操作记录",
      apiKeys: "API Key",
      apiKeysDesc: "为用户生成 MCP/脚本用 Token，可设有效期",
    },
  },
  network: {
    title: "网络管理",
    nav: {
      detail: "网络详情",
      tasks: "监控任务",
      devices: "设备列表",
      topology: "拓扑信息",
      alarms: "告警信息",
      configs: "配置信息",
      webcrt: "WebCRT",
      collectTasks: "采集任务",
      configSync: "配置同步",
      portTraffic: "流量监控",
      portTrafficWall: "流量大屏",
    },
    collapseNav: "折叠侧栏",
    expandNav: "展开侧栏",
    placeholder: {
      title: "功能规划中",
      body: "该能力尚未开放。",
    },
  },
  portTraffic: {
    title: "端口流量监控",
    create: "添加设备监控",
    backList: "返回列表",
    created: "已添加设备监控",
    createFailed: "创建失败",
    updated: "已保存",
    interfacesSaved: "接口已更新",
    started: "已启动",
    paused: "已暂停",
    stopped: "已停止",
    statusRunning: "运行中",
    statusPaused: "已暂停",
    statusStopped: "已停止",
    collecting: "采集中",
    deleted: "已删除",
    confirmDelete: "删除该设备监控及其采样数据？",
    empty: "暂无设备监控。请先选择网元并勾选接口。",
    wall: "监控大屏",
    wallTitle: "端口流量大屏",
    toDevices: "设备管理",
    wallEmpty: "暂无监控设备。请先添加设备并勾选接口。",
    fullscreen: "全屏",
    exitFullscreen: "退出全屏",
    board: "大屏",
    boardPick: "选择大屏",
    boardPickHint: "请选择或新建一张流量大屏。",
    boardEmpty: "还没有大屏。可新建一张用于割接/值班监控。",
    boardDefaultName: "未命名大屏",
    boardName: "名称",
    boardCols: "列数",
    boardCreate: "新建大屏",
    boardEdit: "编辑布局",
    boardSave: "保存",
    boardCancel: "取消",
    boardSaved: "大屏已保存",
    boardCreated: "大屏已创建",
    boardDeleted: "大屏已删除",
    boardConfirmDelete: "删除该大屏及其图格配置？",
    boardUnsavedLeave: "有未保存的修改，确定离开？",
    boardOpenTab: "新页签打开",
    boardOpen: "打开大屏",
    boardListHint: "点击条目在独立页签打开大屏；从工作台打开网络管理不会刷新已打开的大屏。",
    boardPanelCount: "图格数",
    boardUpdated: "更新时间",
    boardClosedHint: "可关闭本页签；也可回到网络管理 → 流量大屏列表重新打开。",
    boardAddPanel: "添加图格",
    boardNoPanels: "该大屏还没有图格，请编辑并添加监控接口。",
    boardPickDevice: "选择设备",
    boardPanelSettings: "图格设置",
    boardPanelTitle: "标题（可选）",
    boardColSpan: "跨列",
    boardPanelStale: "接口已失效或不存在，请重新选择。",
    boardRetarget: "重选接口",
    edit: "编辑",
    save: "保存",
    start: "启动",
    pause: "暂停",
    stop: "停止",
    delete: "删除",
    wizStep1: "选设备",
    wizStep2: "选接口",
    wizStep3: "参数",
    step1: "参数",
    step2: "选网元",
    step3: "选接口",
    step4: "确认",
    prev: "上一步",
    next: "下一步",
    fieldTitle: "任务名称",
    titlePh: "例如：接入侧上联",
    titleRequired: "请填写任务名称",
    portsRequired: "请至少选择一个接口",
    interval: "周期（秒）",
    retention: "保留（天）",
    retentionHintWizard: "若需上周同日对比，建议 ≥8 天",
    concurrency: "并发",
    note: "备注",
    notePh: "可选",
    startNow: "创建后立即启动",
    neKeywordPh: "名称 / IP / 厂商",
    deepLinkHint: "已从拓扑跳转：网元 {{ne}}{{ifname}}。请确认选中后继续。",
    deepLinkIfname: "，接口 {{ifname}}",
    selectedNe: "已选 {{count}} 台网元",
    selectedOneNe: "已选",
    selectedPorts: "已选 {{count}} 个接口",
    pickNeFirst: "请先选择一台网元",
    discover: "拉取接口",
    confirmCreate: "开始监控",
    wallTask: "任务",
    wallDevice: "设备",
    wallPort: "接口",
    wallDeviceLabel: "网元",
    pickPort: "选择接口",
    range: "时间范围",
    compare: "周期对比",
    compareOff: "关闭",
    compareDay: "昨日同时刻",
    compareWeek: "上周同日",
    compareShift: "前一窗",
    compareCustom: "自定义偏移",
    offsetHours: "偏移（小时）",
    baseline: "基线",
    baselineAt: "基线原时刻",
    baselineDevice: "基线网元",
    baselinePort: "基线接口",
    seriesCurrentIn: "当前 In",
    seriesCurrentOut: "当前 Out",
    seriesBaselineIn: "基线 In",
    seriesBaselineOut: "基线 Out",
    mapBaselinePort: "映射基线接口",
    mapBaselineTask: "映射基线任务",
    mapBaselineNone: "不映射",
    retentionHint: "周对比建议保留天数 ≥ 8；否则基线可能无数据。",
    collectNow: "立即采集",
    collectStarted: "已触发采集",
    collectBusy: "采集进行中",
    targetError: "接口最近错误",
    waitSamples: "设备运行后会按周期写入样点；也可点「立即采集」。图会每几秒自动刷新。",
    waitAfterError: "采集失败，请到「流量监控」操作中的日志查看详情，修复后可点「立即采集」重试。",
    log: "日志",
    logTitle: "采集日志",
    logEmpty: "暂无日志。",
    logDevice: "设备",
    logLevel: "级别",
    logTime: "时间",
    logMessage: "内容",
    logClose: "关闭",
    logHasError: "有错误",
    kpiLatest: "最新",
    kpiBw: "带宽",
    latestAt: "最新样点",
    hoverPoint: "光标位置",
    wallLiveTitle: "实时流量",
    filterView: "视图",
    filterMap: "映射基线",
    yMode: "纵轴",
    yModeAuto: "自动（含基线）",
    yModeCurrent: "按当前流量",
    yModeUtil: "利用率 %",
    kpi: {
      tasks: "任务数",
      devices: "监控设备",
      running: "运行中",
      ports: "监控接口",
      samples24h: "24h 样点",
    },
    col: {
      title: "任务",
      device: "设备",
      status: "状态",
      ports: "接口",
      interval: "周期",
      last: "最近采集",
      actions: "操作",
      source: "来源",
      name: "设备",
      vendor: "厂商",
    },
  },
  configSync: {
    title: "配置同步",
    syncNow: "立即全量同步",
    retryFailed: "一键重试失败",
    pause: "暂停",
    resume: "继续",
    stop: "停止",
    confirmStop: "停止后将取消未执行的网元任务，确定停止本轮同步？",
    started: "已启动同步周期",
    paused: "已暂停",
    resumed: "已继续",
    stopped: "已停止同步周期",
    policyTitle: "同步策略",
    policySaved: "策略已保存",
    enabled: "启用周期调度",
    intervalDays: "周期（天）",
    concurrency: "并发",
    historyKeep: "历史保留",
    scope: "范围",
    scopeAll: "全部网元",
    scopeSelected: "指定网元",
    savePolicy: "保存策略",
    selectedCount: "已选 {{count}} 台",
    targetKeywordPh: "名称 / IP / 厂商",
    cyclesTitle: "同步周期",
    cyclesEmpty: "暂无同步周期",
    tasksTitle: "周期任务",
    taskKeywordPh: "名称 / IP / 消息",
    allStatus: "全部状态",
    expand: "展开",
    collapse: "收起",
    kpi: {
      snapshots: "配置覆盖数",
      running: "进行中",
      idle: "空闲",
      last: "最近一轮",
      nextDue: "下次调度",
    },
    col: {
      source: "来源",
      name: "设备",
      vendor: "厂商",
      trigger: "触发",
      status: "状态",
      progress: "进度",
      started: "开始",
      ended: "结束",
      message: "消息",
      actions: "操作",
    },
  },
  networkDevices: {
    title: "设备列表",
    keywordPh: "名称 / IP / ID",
    allSource: "全部来源",
    empty: "暂无网元。",
    col: {
      source: "来源",
      name: "名称",
      vendor: "厂商",
      deviceType: "设备类型",
      connect: "连通状态",
    },
  },
  networkConfigs: {
    title: "配置信息",
    keywordPh: "名称 / IP / ID",
    vendorPh: "厂商",
    allSource: "全部来源",
    empty: "暂无已同步配置。请先在「配置同步」执行采集。",
    view: "查看",
    export: "导出",
    exportBoth: "导出全部",
    exportOk: "配置已导出",
    close: "关闭",
    tabSet: "Set 格式",
    tabHier: "层级格式",
    col: {
      name: "设备",
      vendor: "厂商",
      source: "来源",
      size: "大小",
      collected: "采集时间",
    },
  },
  layout: {
    title: "UME 对接",
    titleUme: "UME同步",
    titleNetwork: "网络管理",
    titleManagedNe: "网元管理",
    titleCollect: "批量采集",
    titleWebcrt: "WebCRT",
    titleTopology: "拓扑管理",
    titlePortTrafficWall: "流量大屏",
    titleUsers: "用户管理",
    titleAudit: "操作审计",
    titleApiKeys: "API Key",
    navUme: "UME 对接",
    netxApi: "netx api",
    oclawBridge: "oclaw WSS",
    language: "语言",
    moreMenu: "更多",
    langZh: "中文",
    langEn: "English",
  },
  auth: {
    loginTitle: "登录 NetX",
    loginHint: "使用本地账号访问运维平台",
    username: "用户名",
    password: "密码",
    login: "登录",
    loggingIn: "登录中…",
    loginFailed: "登录失败",
    logout: "退出",
    usersTitle: "用户管理",
    usersHint: "仅管理员可创建与管理本地账号。",
    addUser: "添加用户",
    role: "角色",
    roleAdmin: "管理员",
    roleUser: "普通用户",
    status: "状态",
    active: "启用",
    disabled: "禁用",
    enable: "启用",
    disable: "禁用",
    actions: "操作",
    newPassword: "新密码",
    resetPassword: "重置密码",
    userCreated: "用户已创建",
    userUpdated: "用户已更新",
    auditTitle: "操作审计",
    auditHintAdmin: "查看所有用户的登录与操作记录。",
    auditHintUser: "查看你自己的操作记录。",
    filterUsername: "用户名筛选",
    filterAction: "动作筛选",
    colTime: "时间",
    colUser: "用户",
    colAction: "动作",
    colMethod: "方法",
    colPath: "路径",
    colStatus: "状态码",
    colIp: "IP",
    apiKeysTitle: "API Key 管理",
    apiKeysHint: "生成长期 Token 供 MCP/脚本调用；明文仅创建时显示一次。管理员可为其他用户签发。",
    tokenName: "名称",
    expiresIn: "有效期",
    expire7d: "7 天",
    expire30d: "30 天",
    expire90d: "90 天",
    expire365d: "1 年",
    expireNever: "永不过期",
    tokenOwner: "所属用户",
    tokenOwnerSelf: "自己（{{user}}）",
    createToken: "生成 Key",
    tokenCreated: "API Key 已生成",
    tokenRevoked: "已吊销",
    tokenOnceHint: "请立即复制保存，关闭后无法再次查看明文：",
    copyToken: "复制",
    tokenCopied: "已复制到剪贴板",
    tokenCopyFailed: "复制失败",
    expiresAt: "到期时间",
    lastUsed: "最近使用",
    tokenStatusActive: "有效",
    tokenStatusExpired: "已过期",
    tokenStatusRevoked: "已吊销",
    revokeToken: "吊销",
    revokeConfirm: "确定吊销该 API Key？",
    forceChangeTitle: "请修改初始密码",
    forceChangeHint: "账号 {{user}} 仍在使用默认密码，登录前必须先修改。",
    oldPassword: "当前密码",
    confirmPassword: "确认新密码",
    savePassword: "保存新密码",
    savingPassword: "保存中…",
    passwordTooShort: "新密码至少 6 位",
    passwordMismatch: "两次输入的新密码不一致",
    passwordMustChange: "新密码不能与默认/旧密码相同",
  },
  collect: {
    create: {
      title: "新建采集任务",
      hint: "配置命令与网元后创建任务；创建后需在任务列表中点击「开始」执行采集。",
      selectedTitle: "已选择网元",
      selectedEmpty: "请从下方筛选并逐个添加网元。",
      selectedCount: "共 {{count}} 台",
      clearSelected: "清空已选",
      remove: "移除",
      pickTitle: "可选网元（连通性已通过）",
      pickHint: "仅展示 connect_status=pass 的网元。请先在「网元管理」完成连通性测试。",
      pickEmpty: "没有匹配的网元。",
      filterKeyword: "筛选",
      filterKeywordPh: "名称 / IP / 厂商 / 设备类型",
      add: "添加",
      addBatch: "批量添加（{{count}}）",
      added: "已添加",
      create: "创建任务",
      creating: "创建中…",
      expand: "展开",
      collapse: "收起",
      meta: "已选 {{ne}} 台网元 · {{cmd}} 条命令",
    },
    eligible: {
      title: "可选网元（连通性已通过）",
      hint: "仅展示 connect_status=pass 的网元。请先在「网元管理」完成连通性测试。",
      empty: "暂无已通过连通性测试的网元。",
    },
    form: {
      title: "采集配置",
      jobTitle: "任务名称",
      jobTitlePh: "留空则自动生成",
      commands: "采集命令（每行一条，# 开头为注释）",
      commandsPh: "display version\ndisplay current-configuration",
      commandsHint: "命令将按顺序在每台设备上执行，输出合并为一份文本日志（格式与旧版 NetX 采集一致）。",
      meta: "已选 {{ne}} 台网元 · {{cmd}} 条命令",
      start: "开始采集",
      starting: "提交中…",
    },
    created: "采集任务已创建：{{id}}",
    started: "采集已开始：{{id}}",
    paused: "任务已暂停",
    restarted: "已重新开始采集",
    retryFailedDone: "已开始重采失败网元",
    deleted: "任务已删除",
    nothingToRetry: "没有可重试的失败网元",
    neBusy: "部分网元正在被其他采集任务占用，请等待其完成后再开始",
    jobRunning: "该任务已在执行中",
    confirmDelete: "确定删除该采集任务？相关日志文件将一并删除。",
    jobs: {
      title: "采集任务",
      col: {
        title: "任务",
        status: "状态",
        progress: "进度",
        created: "创建时间",
        lastRun: "最近执行",
        actions: "操作",
      },
      ok: "成功",
      fail: "失败",
      expand: "详情",
      collapse: "收起",
      pause: "暂停",
      start: "开始",
      starting: "启动中…",
      restart: "重新开始",
      retryFailed: "重采失败网元",
      downloadResults: "下载结果",
      delete: "删除",
      autoRefresh: "任务进行中，每 2 秒自动刷新",
      runsInProgress: "部分网元仍在采集中，请稍候…",
    },
    runs: {
      status: "状态",
      message: "说明",
      download: "日志",
      downloadFile: "下载",
      filterStatus: "状态筛选",
      filterDevice: "设备筛选",
      deviceKeywordPh: "名称 / IP",
      allStatus: "全部状态",
    },
  },
  managedNe: {
    title: "网元管理",
    credsNotConfigured: "未配置 NETX_CREDENTIAL_SECRET_KEY，无法保存密码。请在 .env 中设置 Fernet 密钥后重启 API。",
    add: "新增网元",
    importBtn: "批量导入",
    downloadTemplate: "下载导入模板",
    importing: "导入中…",
    edit: "编辑",
    delete: "删除",
    openTerminal: "终端",
    confirmDelete: "确定删除该网元？",
    batchDelete: "批量删除",
    batchDeleting: "删除中…",
    batchDeleteConfirm: "确定删除选中的 {{n}} 台网元？此操作不可恢复。",
    batchDeleteDone: "已删除 {{n}} 台网元",
    batchDeleteSelectRequired: "请先勾选要删除的网元",
    keywordPh: "名称 / IP / 用户名 / 标签",
    allVendors: "全部厂商",
    allConnectStatus: "全部连通状态",
    stats: {
      title: "统计",
      total: "共 {{n}} 台网元",
      pass: "已连通",
      fail: "失败",
      unknown: "未测试",
      testing: "测试中",
      batchProxy: "一键添加代理",
      batchTest: "一键连通性测试",
      tagFilter: "按标签筛选",
      all: "全部",
      allTag: "全部（无标签筛选）",
      noTag: "无标签",
      tagStats: "按标签统计（Top）",
      confirm: "将对 {{n}} 台网元执行操作，确认继续？",
      proxyDone: "已为 {{n}} 台网元提交代理配置",
      testDone: "已提交 {{n}} 台网元连通性测试",
      loadingIds: "加载中…",
    },
    col: {
      name: "名称",
      vendor: "厂商",
      deviceType: "设备类型",
      ip: "管理地址",
      port: "端口",
      protocol: "协议",
      user: "用户名",
      password: "密码",
      tags: "标签",
      remark: "备注",
      connect: "连通性",
      testedAt: "测试时间",
      actions: "操作",
    },
    connect: {
      run: "连通性测试",
      running: "测试中…",
      submitted: "已提交 {{n}} 台设备测试",
      retest: "重新测试",
    },
    connectDetail: "详情",
    connectDetailTitle: "连通性测试日志",
    connectDetailEmpty: "暂无日志。请先执行连通性测试；失败时会记录完整错误与跳板上下文（不含密码）。",
    umeSync: {
      sync: "同步 UME 网元",
      syncing: "同步中…",
      delete: "删除 UME 网元",
      deleting: "删除中…",
      deleteConfirm: "确定删除所有通过 UME 同步到网元管理中的网元？此操作不可恢复。",
      done: "UME 同步完成：新增 {{inserted}}，更新 {{updated}}，删除 {{deleted}}，UME 清单共 {{total}} 台",
      deletedDone: "已删除 {{n}} 台 UME 同步网元",
    },
    account: {
      batchAdd: "一键添加账号",
      batchByTag: "按标签添加账号",
      batchTitle: "批量添加账号",
      batchHint: "将以下账号信息应用到已选中的 {{n}} 台网元。",
      batchByTagHint: "将以下账号信息应用到指定标签下的网元；密码可留空，仅更新用户名。",
      batchDone: "已为 {{n}} 台网元更新账号",
      selectRequired: "请先勾选要配置账号的网元",
      applying: "应用中…",
      apply: "应用到网元",
      usernameOrPasswordRequired: "用户名和密码至少填写一项",
      passwordOptionalBatch: "留空则不修改",
    },
    help:
      "【批量导入】\n" +
      "· 必填列：device_type、ip、username、port、protocol、name、vendor；可先下载模板。\n" +
      "· password 可留空（直连需填；堡垒机托管或后续批量添加代理时可空）。\n" +
      "· 推荐流程：先导入网元 → 勾选网元 → 点「批量添加代理」统一配置跳板/堡垒机。\n\n" +
      "【跳板 / 堡垒机】\n" +
      "· 堡垒机 SSH 用户名模板：{hop_user}@{target_user}@{target_ip}（堡垒机地址单独填在跳板地址）；命令行等价：ssh 用户@目标@IP@堡垒机。\n" +
      "· 堡垒机托管时填「跳板密码」（Vault 密码），目标密码可留空；手动模式需填目标密码。\n" +
      "· JumpServer/CBH 常用跳板端口 2222，部分现场为 22。\n\n" +
      "【连通性 / 编辑】\n" +
      "· 保存密码需配置 NETX_CREDENTIAL_SECRET_KEY。\n" +
      "· 编辑时密码留空表示不修改；连通性失败请点「详情」查看 hop 上下文（不含密码）。",
    importResult: {
      done: "导入完成：新增 {{inserted}}，更新 {{updated}}，失败 {{failed}} 行",
    },
    form: {
      requiredHint: "带 * 为必填项",
      nameConnectHint: "连通性测试成功后将自动更新为设备名称",
      createTitle: "新增网元",
      editTitle: "编辑网元",
      save: "保存",
      saving: "保存中…",
      cancel: "取消",
      created: "网元已创建",
      updated: "网元已更新",
      deleted: "网元已删除",
      passwordRequired: "请填写密码",
      passwordOptional: "留空则不修改",
    },
    hop: {
      sectionTitle: "跳板 / 代理",
      type: "跳板类型",
      enable: "经跳板登录目标网元",
      vendor: {
        zte: "ZTE 设备（CLI 跳登）",
        huawei: "华为设备（CLI 跳登）",
        cisco: "思科设备（CLI 跳登）",
        linux: "Linux 服务器（SSH 隧道）",
        bastion: "堡垒机（SSH 协议代理）",
      },
      zteHint: "在 ZTE 设备上执行 ssh/telnet 命令跳转到目标，目标账号由二次认证输入。",
      huaweiHint: "在华为设备上执行 telnet / stelnet（SSH）跳登；stelnet 即 SSH。目标账号由二次认证输入。",
      ciscoHint: "在思科设备上执行 ssh -vrf / telnet /vrf 跳登，目标账号由二次认证输入。",
      linuxHint: "先 SSH 登录 Linux 跳板，经 direct-tcpip 隧道连接目标 IP:端口（等同 ProxyJump）。",
      bastionHint:
        "SSH 复合用户名直连堡垒机，由堡垒机协议代理到目标。示例：bastion-user@target-user@2.2.2.2@1.1.1.1；密码为 Vault/堡垒机密码。JumpServer/CBH 常用端口 2222。",
      targetAuthMode: "目标凭据",
      targetAuthBastionManaged: "堡垒机托管（目标密码可留空）",
      targetAuthManual: "手动输入（连接后二次认证）",
      targetAuthHint: "堡垒机托管时仅需堡垒机密码；手动模式需填写目标网元密码。",
      usernameTemplate: "SSH 用户名模板",
      templateHintBastion:
        "默认 {hop_user}@{target_user}@{target_ip}，堡垒机地址填「跳板地址」。命令行示例：ssh bastion-user@target-user@2.2.2.2@1.1.1.1。",
      host: "跳板地址",
      port: "跳板端口",
      protocol: "跳板协议",
      protocolSshStelnet: "ssh（stelnet）",
      username: "跳板用户名",
      password: "跳板密码",
      vrf: "管理 VRF（可选）",
      vpnInstance: "VPN-Instance（可选）",
      vrfCisco: "VRF（可选，如 MGMT）",
      commandTemplate: "跳登命令模板",
      templateHint:
        "ZTE 常用：telnet {target_ip}、telnet {target_ip} vrf {vrf}、ssh {target_ip}、ssh {target_ip} vrf {vrf}。按跳板协议与 VRF 自动推荐；留空时后端同样规则。目标账号密码由二次认证提示输入。",
      templateHintHuawei:
        "华为常用：telnet {target_ip}、telnet vpn-instance {vrf} {target_ip}、stelnet {target_ip}、stelnet {target_ip} -vpn-instance {vrf}。SSH 协议对应 stelnet。留空时按协议与 VPN-Instance 自动推荐。",
      templateHintCisco:
        "思科常用：ssh {target_ip}、ssh -vrf {vrf} {target_ip}、telnet {target_ip}、telnet {target_ip} /vrf {vrf}。留空时按协议与 VRF 自动推荐。",
      badge: {
        zte: "ZTE跳板",
        huawei: "华为跳板",
        cisco: "思科跳板",
        linux: "Linux跳板",
        bastion: "堡垒机",
      },
      hostRequired: "请填写跳板地址",
      userRequired: "请填写跳板用户名",
      passwordRequired: "请填写跳板密码",
      batchAdd: "添加代理",
      batchTitle: "批量添加代理",
      batchHint: "将以下跳板配置应用到已选中的 {{n}} 台网元（会覆盖原有跳板设置）。",
      batchDone: "已为 {{n}} 台网元配置代理",
      selectRequired: "请先勾选要配置的网元",
      applying: "应用中…",
      apply: "应用到选中网元",
    },
  },
  ume: {
    token: {
      title: "UME Token 状态",
      disconnected: "disconnected",
      connected: "connected",
      connectedRenew: "connected (需续期)",
      expiresIn: "expires_in",
      needsRenew: "需续期 / 0s",
      preview: "preview",
      refreshStatus: "刷新状态",
      renewLogin: "手动续期/登录",
      renewing: "续期中…",
      disconnect: "断开 token",
      disconnecting: "断开中…",
      renewOkChanged: "续期成功，token 已更新",
      renewOkSame: "续期完成（与此前一致）",
      disconnectOk: "已断开 UME token",
      renewHint: "库中 token 缺少有效过期时间或已过期，请点「手动续期/登录」或等待后台自动续期",
    },
    subscription: {
      title: "UME 告警订阅（WebSocket）",
      help:
        "订阅需手动建立/取消；建立后（或重启后若库中仍有有效订阅）后台会自动连接 WSS 接收实时告警。后台任务 alarms_current_ws_consumer 的 pause/resume 会停止或恢复 WSS 连接（不会取消 UME 订阅）。",
      sub: "订阅",
      subActive: "已建立",
      subInactive: "未建立",
      wssPaused: "已暂停",
      wssModeBanner:
        "当前告警由 WSS 实时维护（模式: {{mode}}），定时 REST 全量同步已暂停。需要全量对账时请使用下方「同步当前告警」。",
      serverLostBanner:
        "UME 服务器侧告警订阅已丢失或已过期，本地记录可能仍显示「已建立」。请确认清除本地记录后重新订阅。",
      establish: "建立告警订阅",
      establishing: "建立订阅…",
      reestablish: "清除本地并重新订阅",
      reestablishing: "重新订阅…",
      cancel: "取消告警订阅",
      cancelling: "取消订阅…",
      refreshStatus: "刷新订阅状态",
      clearLocalOnly: "仅清除本地记录",
      clearing: "清除中…",
      opFailed: "订阅操作失败",
      confirmClearDefault:
        "UME 侧告警订阅已不存在或已过期（服务器订阅已丢失）。\n\n是否清除本地订阅记录？清除后可点击「建立告警订阅」重新订阅。",
      confirmReestablish: "将清除本地订阅记录并在 UME 上重新建立告警订阅，是否继续？",
      titleLoginFirst: "请先登录 UME token",
      titleReestablish: "清除本地失效记录并重新向 UME 建立订阅",
      establishInvalid: "建立订阅未返回有效 id/uri",
      establishExists: "订阅已存在，未重复建立（WSS 将保持/恢复连接）",
      establishOk: "告警订阅已建立，WSS 将自动连接",
      clearLocalOk: "已清除本地订阅记录，可重新建立订阅",
      serverLostMsg: "UME 侧告警订阅已丢失。请确认是否清除本地订阅记录后重新订阅。",
      cancelFailed: "取消订阅失败：UME 侧订阅可能仍存在，请查看错误详情后重试",
      cancelOkMissing: "本地已清除（UME 侧订阅此前已不存在）",
      cancelOk: "告警订阅已取消",
      wsLogs: "WSS 运行日志",
      wsActivity: "最近活动 {{time}}",
      wsAutoRefresh: "自动刷新",
      wsLogsEmpty: "暂无日志（建立订阅并连接 WSS 后会出现连接、收包、重连等记录）",
    },
    keyAlert: {
      title: "AI 告警监控（OClaw WhatsApp）",
      showPanel: "展开",
      hidePanel: "收起",
      help: "按 notificationId 精确匹配，或按告警描述关键字模糊匹配（不区分大小写，匹配 nativeProbableCause 等字段）；可选限定 UME Inventory 中的网元类型 (ne_type)，不选则匹配全部设备。经 OClaw WebSocket 推送到 WhatsApp 群。鉴权与 NETX_OCLAW_ANALYZE_TOKEN 共用。",
      ws: "OClaw WSS",
      wsConnected: "已连接",
      wsDisconnected: "未连接",
      wsDisabled: "未启用",
      wsPaused: "已暂停",
      publishedOk: "发布成功",
      publishedFail: "发布失败",
      queue: "待发队列",
      matchType: "匹配方式",
      matchNotificationId: "告警码 (notificationId)",
      matchKeyword: "告警描述关键字",
      matchValuePhNotificationId: "输入 notificationId",
      matchValuePhKeyword: "输入匹配关键字（不区分大小写）",
      label: "规则描述",
      labelPh: "必填，如 BGP Down",
      neTypesLabel: "设备类型（可选，多选）",
      neTypesHint: "不选表示全部设备类型；选项来自 UME Inventory 同步后的 ne_type。",
      neTypesEmpty: "暂无设备类型，请先同步 Inventory",
      neTypesAll: "全部",
      forwardOnClear: "告警清除时也推送",
      forwardOnClearHelp: "全局开关：对所有监控规则生效。默认只在告警新增/更新时推送；勾选后，UME 上报告警已清除时也会向 WhatsApp 发送清除通知。",
      add: "添加规则",
      adding: "添加中…",
      delete: "删除",
      edit: "修改",
      editTitle: "修改监控规则",
      save: "保存",
      saving: "保存中…",
      cancel: "取消",
      editOk: "规则已更新",
      pickFromAlarms: "加载当前告警参考",
      emptyRules: "尚未配置监控规则",
      colType: "类型",
      colMatch: "匹配内容",
      colLabel: "描述",
      colNeTypes: "设备类型",
      colForwardClear: "清除推送",
      colPublished: "发布次数",
      colAttempts: "尝试次数",
      colLast: "最近推送",
      colActions: "操作",
      colMonitor: "是否监控",
      monitorOn: "开启",
      monitorOff: "关闭",
      filterKeywordPh: "筛选匹配内容 / 描述",
      filterMatchAll: "全部类型",
      filterEnabledAll: "全部状态",
      filterEnabledOn: "监控中",
      filterEnabledOff: "已暂停",
      addOk: "已添加监控规则",
      deleteOk: "已删除",
      confirmDelete: "确定删除该监控规则？",
      yes: "是",
      no: "否",
    },
    sync: {
      title: "UME 同步",
      inventory: "同步 Inventory",
      alarmsCurrent: "同步当前告警",
      full: "全量同步",
      failed: "同步失败",
    },
    tasks: {
      currentTitle: "当前任务",
      running: "running",
      noRunning: "当前无运行中的任务",
      runtimeTitle: "后台任务",
      runtimeOpFailed: "后台任务操作失败",
      noRuntime: "暂无后台任务状态",
      intervalTitle: "Configured sleep between loop iterations (clamped at process start)",
      lastRunTitle: "Last finished sync for scheduled tasks; refreshed at each loop tick",
      deletedTitle: "全量对账删除条数：inventory 为网元行，alarms_current 为当前告警行，其余域多为 0",
      lastErrorCol: "last_error",
      runtimeError: {
        startup_alarm_sync_before_ws: "启动中：正在同步当前告警（完成后连接 WSS）…",
        startup_gate_waiting: "启动 REST 全量同步未完成，定时 REST 与 WSS 均待命",
        wss_active_skip_rest: "WSS 实时接收中，已跳过 REST 同步",
        pulling_alarms_current: "正在拉取 UME 当前告警…",
        alarms_sync_in_progress_skip: "另一条当前告警 REST 同步进行中，已跳过",
        pulling_inventory: "正在拉取 UME 网元清单…",
        ume_ws_disabled_no_base_url: "未启用或未配置 UME_BASE_URL",
        oclaw_fwd_disabled: "未启用或未配置 NETX_OCLAW_ALARM_WS / token / url",
        resumed_sync_soon: "已恢复：将跳过本轮周期等待并尽快同步",
        resumed_wss_reconnect: "已恢复：将尽快重连 WSS",
        resumed_oclaw_wss_reconnect: "已恢复：将尽快重连 OClaw WSS",
        resumed: "已恢复",
        keepalive_failed: "Token 保活失败",
      },
      wsState: {
        init: "初始化",
        connected: "已连接",
        connecting: "连接中",
        disconnected: "已断开",
        no_subscription: "无订阅",
        waiting_token: "等待 token",
        paused: "已暂停",
        error: "连接异常",
        reconnecting: "重连等待",
        subscription_lost: "UME 订阅已丢失",
        disabled_no_base_url: "未启用或未配置 UME_BASE_URL",
      },
      fwdState: {
        paused: "已暂停",
        disabled: "未启用",
        connecting: "连接中",
        connected: "已连接",
      },
      runtimeTask: {
        token_keepalive: "UME Token 保活",
        alarms_current_auto_sync: "当前告警定时同步",
        alarms_current_ws_consumer: "UME 告警 WSS",
        oclaw_alarm_forwarder: "OClaw 关键告警 WSS",
        inventory_auto_sync: "Inventory 定时同步",
      },
    },
    syncStatus: {
      title: "同步状态",
      showPanel: "展开",
      hidePanel: "收起",
      empty: "暂无同步记录",
    },
    ne: {
      title: "网元清单",
      showPanel: "展开",
      hidePanel: "收起",
      keywordPh: "keyword(ne_id/ne_name/user_label/ip/host_name)",
      clearTitle: "清空 keyword，回到第 1 页",
      expand: "展开详情",
      collapse: "收起详情",
      cliConnect: "CLI 连通",
    },
    tabs: {
      main: "UME 同步",
      cli: "CLI 连接",
    },
    cli: {
      title: "UME CLI 连接配置",
      showPanel: "展开",
      hidePanel: "收起",
      hint: "为 UME 清单网元配置统一 SSH 凭据与跳板/堡垒机；OClaw MCP 可通过 ume_ne_id 直接执行 show 命令，无需逐台录入 managed_ne。",
      statusReady: "CLI 配置已就绪，可对 UME 网元执行命令。",
      statusNotReady: "请填写目标用户名，并配置跳板/堡垒机（若启用）。",
      profileName: "配置名称",
      targetUsername: "目标 SSH 用户名",
      targetPassword: "目标 SSH 密码",
      passwordKeep: "留空则不修改",
      newProfile: "新建配置",
      deleteConfirm: "确定删除该 CLI 配置？",
      deleted: "配置已删除",
      saved: "CLI 配置已保存",
      connectTestTitle: "样本网元连通性测试",
      sampleNePh: "ume_ne_id（从下方网元清单复制）",
      sampleNeRequired: "请填写 ume_ne_id",
      connectTestSubmitted: "已提交连通性测试",
      connectTestWaiting: "等待测试结果…",
      connectTestRunning: "连通性测试中…",
      connectTestResult: "测试结果",
      existingProfiles: "已有配置",
      default: "默认",
    },
    alarms: {
      title: "当前告警",
      movedHint: "当前告警查询已迁至网络管理 →",
      showPanel: "展开",
      hidePanel: "收起",
      keywordPh: "keyword(告警键/原因/ne_name/host_name/ip 等)",
      hostNamePh: "host_name（含匹配）",
      allSeverity: "全部级别",
      clearedAll: "is_cleared: all",
      clearTitle: "清空 keyword、host_name、级别、is_cleared，回到第 1 页",
      filterByHost: "按该主机名筛选",
      noHostName: "无 host_name（需先同步网元）",
    },
  },
  webcrt: {
    title: "WebCRT",
    deviceList: "设备列表",
    sessionManager: "设备列表",
    connect: "连接",
    hint: "选择网元，在浏览器中打开交互式终端。凭据由服务端解密，不会下发到前端。",
    hintCrt: "在左侧点击网元即可打开终端；支持托管、会话与 UME；也可用菜单「新建会话」快速登录。",
    filterKeyword: "筛选",
    filterKeywordPh: "按名称 / IP / 标签筛选",
    empty: "没有匹配的网元。可切换来源或调整搜索关键字。",
    open: "打开终端",
    opening: "连接中…",
    opened: "已打开 {{name}}",
    disconnect: "断开",
    closed: "会话已断开",
    termPlaceholder: "尚未打开终端会话",
    sessionMeta: "{{name}} · {{ip}}",
    source: {
      all: "全部",
      managed: "托管",
      webcrt: "会话",
      ume: "UME",
    },
    newSession: {
      title: "新建会话",
      hint: "填写主机与协议后连接。SSH 弹出用户名/密码（可改）；Telnet 进终端交互登录。同名会话自动加 (1)、(2)…，允许相同 IP。",
      connect: "连接",
      connecting: "连接中…",
      protocol: "协议",
      host: "主机",
      port: "端口",
      sessionName: "会话名",
      sessionNamePh: "可选，默认使用 IP",
      authTitle: "SSH 登录",
      savePassword: "保存密码",
      ipRequired: "请填写主机地址",
      userRequired: "请填写用户名",
      passwordRequired: "请填写密码",
    },
    status: {
      idle: "空闲",
      connecting: "连接中",
      connected: "已连接",
      error: "错误",
      closed: "已关闭",
    },
    phase: {
      creating: "创建会话",
      authenticating: "正在认证",
      waitingPrompt: "等待设备提示符",
      hint: "设备较慢时可能需要十几秒，请稍候",
    },
    tabMenu: {
      close: "关闭",
      closeOthers: "关闭其他",
      closeAll: "关闭全部",
      copyIp: "复制 IP",
      copyIpOk: "已复制 {{ip}}",
      copyIpEmpty: "该标签没有 IP",
    },
    treeMenu: {
      rename: "重命名",
      renameLabel: "会话名",
      renameSave: "保存",
      renameRequired: "请填写会话名",
      renamed: "会话已重命名",
      delete: "删除会话",
      deleteConfirm: "确定删除会话「{{name}}」？此操作不可恢复。",
      deleted: "会话已删除",
    },
    keywordHl: {
      title: "关键字突出显示",
      enabled: "启用",
      newKeyword: "新建关键字",
      newKeywordPh: "输入关键字或正则",
      regex: "正则表达式",
      add: "添加",
      colKeyword: "关键字",
      colRegex: "正则",
      empty: "尚未添加关键字",
      moveUp: "上移",
      moveDown: "下移",
      remove: "删除",
      caseSensitive: "区分大小写",
      color: "字符颜色",
      saved: "关键字突出显示已保存",
    },
    actions: {
      reconnect: "重新连接",
      recordLog: "记录日志",
      clear: "清空",
      copy: "拷贝",
      recording: "记录中",
      recordingOn: "已开始记录日志",
      recordingSaved: "日志已保存",
      copied: "已复制到剪贴板",
      copyEmpty: "终端内容为空",
      copyFailed: "复制失败",
      break: "Break",
      breakSent: "已发送 Break",
      broadcast: "广播",
      broadcastSent: "已广播到全部会话",
      postLogin: "登录后命令",
    },
    favorites: "收藏",
    recent: "最近",
    favorite: "收藏/取消",
    encoding: "编码",
    fontSize: "字号",
    theme: "主题",
    themeDark: "深色",
    themeLight: "浅色",
    colorScheme: "配色方案",
    backgroundColor: "背景色",
    foregroundColor: "字体色",
    scheme: {
      dark: "深蓝（默认）",
      blackWhite: "白底黑字",
      whiteBlack: "黑底白字",
      greenBlack: "黑底绿字",
      amberBlack: "黑底琥珀",
      custom: "自定义",
    },
    copyOnSelect: "选中即复制",
    pasteDelay: "粘贴最大行间隔",
    pasteDelayOff: "无延迟（整块发送）",
    keepalive: "SSH Keepalive",
    keepaliveOff: "关闭",
    keepaliveSec: "{{n}} 秒",
    options: "选项",
    globalSessionOptions: "全局会话选项",
    sessionOptionsSave: "保存",
    sessionOptionsCancel: "取消",
    sessionOptionsSaved: "已保存全局会话选项",
    disconnectBanner: "会话已断开",
    disconnectBannerError: "会话出错或连接中断",
    broadcastPh: "发送到全部标签…",
    buttonBarHint: "每行：按钮名|命令",
    postLoginPrompt: "登录后自动执行（每行一条，仅本设备）",
    postLoginSaved: "登录后命令已保存",
    sftp: {
      title: "SFTP",
      refresh: "刷新",
      up: "上级",
      upload: "上传",
      uploaded: "上传成功",
      uploading: "上传 {{done}}/{{total}} · {{name}} {{pct}}",
      downloading: "下载 {{name}} {{pct}}",
      uploadPartial: "上传完成 {{ok}} 个，失败 {{failed}} 个",
      dropHint: "松开以上传到当前目录",
      dropEmpty: "未识别到可上传的文件",
      dir: "目录",
      loading: "正在加载…",
      enterHint: "双击进入目录",
      downloadHint: "单击下载文件",
      colName: "名称",
      colSize: "大小",
      colMtime: "修改时间",
      colOwner: "所有者",
      colGroup: "组",
      colMode: "权限",
      resizeHint: "拖动调整 SFTP / 终端宽度",
      colResizeHint: "拖动调整列宽",
    },
    term: {
      findPh: "查找…",
      findPrev: "上一个",
      findNext: "下一个",
      findClose: "关闭查找",
      copy: "复制",
      paste: "粘贴",
      clear: "清空",
      pasting: "粘贴中 {{done}}/{{total}} 行…",
      wsError: "[WebSocket 错误]",
      wsClosed: "[WebSocket 已关闭 code={{code}}]",
      sessionStatus: "[会话 {{state}}{{detail}}]",
      outputTruncated: "[输出过快，已丢弃 {{count}} 段]",
    },
    err: {
      deviceType: "不支持的设备类型",
      ipConflictRestart: "数据库仍限制 IP 唯一，请重启 netx API 后再试",
      sessionLimit: "并发会话已达上限，请先关闭其他终端",
      neNotFound: "网元不存在",
      credsIncomplete: "网元账号或密码不完整",
      authRejected: "用户名或密码错误，请重新输入",
      cliProfile: "UME 网元需要先配置 CLI 连接模板（默认账号/跳板）",
      connectFailed: "登录设备失败：{{detail}}",
      sftpHop: "SFTP 暂不支持跳板设备，请使用直连 SSH",
      sftpSsh: "SFTP 仅支持 SSH 协议",
      sftpNeedPassword: "SFTP 需要已保存的 SSH 密码（会话弹窗密码不会用于文件传输）",
      sftpUnsupported: "当前 SSH 会话未提供 SFTP（设备可能未开启）",
      sftpTooLarge: "文件超过大小限制（默认 512MB）",
      queueDropped: "终端输出过快，已丢弃约 {{count}} 段，内容可能不完整",
      websocket: "WebSocket 连接失败",
    },
  },
  topology: {
    title: "拓扑管理",
    maps: "拓扑图",
    newMap: "新建",
    newMapName: "新拓扑图",
    rename: "重命名",
    renamePrompt: "拓扑图名称",
    renameHint: "双击可重命名",
    renamed: "拓扑图已重命名",
    deleteMap: "删除图",
    deleteMapConfirm: "删除拓扑图「{{name}}」？节点与链路会一并删除。",
    emptyMaps: "还没有拓扑图，先新建一张。",
    palette: "网元库",
    paletteHint: "点击或拖到画布添加",
    filterPh: "输入即筛：名称 / IP / 厂商",
    save: "保存",
    saveDirty: "保存 *",
    unsavedConfirm: "有未保存的更改，确定丢弃并切换吗？",
    saving: "保存中…",
    saved: "拓扑已保存",
    discover: "发现全量链路",
    discovering: "发现中…",
    discoverOne: "发现链路",
    discovered: "发现完成：新增 {{added}}，更新 {{updated}}，未发现 {{stale}}",
    discoverFail: "发现失败：{{detail}}",
    discoverOneNeedNe: "该节点未关联可扫描网元",
    selectMap: "请选择或新建一张拓扑图",
    renameNode: "重命名",
    renameNodePrompt: "网元显示名称",
    sourcePort: "本端端口",
    targetPort: "对端端口",
    canvasHint:
      "工具栏切换选择/平移/拖动/连线；框选多选；布局可自动构图。蓝虚线=发现链路，红虚线=未发现。快捷键 V/H/A/C，Ctrl+Z 撤销。",
    selected: "已选节点",
    selectedEdge: "已选链路",
    selectedCount: "已选 {{count}}",
    toolModes: "编辑模式",
    toolSelect: "选择",
    toolPan: "平移",
    toolDrag: "拖动",
    toolConnect: "连线",
    layout: "布局",
    layoutHierarchicalTb: "层次 · 自上而下",
    layoutHierarchicalLr: "层次 · 从左到右",
    layoutForce: "力导向",
    layoutGrid: "网格",
    layoutRadial: "环形",
    layoutSelected: "仅布局选中（层次）",
    layoutNeedSelection: "请先选中要布局的节点",
    align: "对齐",
    alignLeft: "左对齐",
    alignRight: "右对齐",
    alignTop: "顶对齐",
    alignBottom: "底对齐",
    alignHCenter: "水平居中",
    alignVCenter: "垂直居中",
    alignHDistribute: "水平分布",
    alignVDistribute: "垂直分布",
    alignNeedSelection: "请至少选中两个节点",
    snapGrid: "网格吸附",
    autoLayoutDiscover: "发现后自动布局",
    undo: "撤销",
    redo: "重做",
    discoverSelected: "发现选中 ({{count}})",
    removeSelected: "移除选中 ({{count}})",
    openWebcrt: "打开终端",
    openNe: "网元详情",
    removeNode: "从画布移除",
    removeEdge: "删除链路",
    nodeMenu: "网元",
    selectionMenu: "多选",
    edgeStyle: "链路样式",
    edgeColor: "颜色",
    edgeLineStyle: "线型",
    edgeLineSolid: "实线",
    edgeLineDashed: "虚线",
    edgeLineDotted: "点线",
    edgeWidth: "粗细",
    edgeStyleReset: "恢复默认",
    edgeDefaults: "默认链路样式",
    edgeDefaultsReset: "恢复出厂",
    noNeLink: "未关联托管网元",
    edgeManual: "人工",
    edgeDiscovered: "发现",
    edgeStale: "未发现",
    fit: "适应画布",
    fullscreen: "全屏显示",
    exitFullscreen: "退出全屏",
    display: "显示",
    hideIp: "隐藏 IP",
    hideVendor: "隐藏厂商",
    hidePorts: "隐藏端口",
    edgeFlow: "链路流动",
    collapseSidebar: "折叠侧栏",
    expandSidebar: "展开侧栏",
    hideAdded: "隐藏已添加",
    paletteEmpty: "没有匹配的网元。",
    paletteHiddenAll: "已添加网元已隐藏；取消勾选可重新显示。",
    paletteSource: "网元来源",
    paletteManaged: "托管网元",
    paletteUme: "UME 网元",
    paletteLoading: "加载中…",
    discoverReport: "发现进度",
    discoverClose: "关闭",
    discoverCancel: "取消发现",
    discoverProgress: "正在扫描画布上 {{count}} 台托管网元（串行登录采集 LLDP，请稍候）…",
    discoverProgressLive: "正在扫描 {{index}}/{{total}}：{{name}}",
    discoverSummary: "扫描 {{scanned}} 台 · 新增 {{added}} · 更新 {{updated}} · 未发现 {{stale}} · 失败 {{failed}}",
    discoverNeOk: "邻居 {{neighbors}} · 新增 {{added}} · 更新 {{updated}}",
    discoverNeFail: "采集失败",
    discoverUnmatched: "未匹配 {{count}}",
    discoverUnmatchedMore: "另有 {{count}} 条未列出",
    discoverParserStub: "厂商解析器「{{parser}}」仍为 stub，已采集到输出但未能解析邻居",
    discoverNoTargets: "画布上没有可扫描网元。请添加托管网元，或添加已配置 CLI 凭据的 UME 网元。",
    discoverFilter: "结果筛选",
    discoverFilterIssues: "问题",
    discoverFilterFail: "失败",
    discoverFilterWarn: "警告",
    discoverFilterOk: "成功",
    discoverFilterAll: "全部",
    discoverFilterDetail: "详情",
    discoverListTitle: "发现详情",
    discoverListEmpty: "当前筛选下没有网元。",
    discoverShowLimited: "仅显示前 {{shown}} / {{total}} 条（请用筛选缩小范围）",
    discoverViewDetail: "详情",
    discoverLinkCount: "链路 {{count}}",
    discoverLinksTitle: "匹配链路（{{count}}）",
    discoverLinksEmpty: "本次未匹配到画布上的对端网元链路。",
    discoverUnmatchedTitle: "未匹配邻居（{{count}}）",
    discoverUnmatchedEmpty: "无未匹配邻居。",
    discoverColPeer: "对端网元",
    discoverColRemote: "邻居",
    discoverColLocalPort: "本端端口",
    discoverColRemotePort: "对端端口",
    discoverColProtocol: "协议",
    discoverColAction: "结果",
    discoverLinkAdded: "新增",
    discoverLinkUpdated: "更新",
    discoverLinkKeptManual: "保留人工",
    discoverLocatePeer: "定位对端",
    discoverLocateNe: "定位本端",
    discoverRawPreview: "采集原文预览（过长会截断，不影响解析）",
    findNode: "定位",
    findNodePh: "输入即搜：名称 / IP / 厂商",
    findNoMatch: "画布上没有匹配的节点",
    findMore: "另有 {{count}} 条匹配…",
    locateOnCanvas: "点击定位到画布",
    openPortTraffic: "打开端口流量",
    removeStale: "清除未发现 ({{count}})",
    removeStaleHint: "删除红色标记的未发现链路",
    staleRemoved: "已删除 {{count}} 条未发现链路",
    connectHint: "连线模式：依次点击源节点 → 目标节点（Esc 或切回选择退出）",
  },
};

export default zh;