重构主控编排与运行时预热链路，统一工作区提示词/专家调度协议并补齐 wiki 记忆注入与写回闭环。

同时收敛启动与运维脚本默认行为（含 wiki worker）、更新 Admin 可观测性与相关测试，降低首轮时延并提高运行稳定性。

Made-with: Cursor

openclaw/docs/gateway/secrets-plan-contract.md

@@ -0,0 +1,116 @@
+---
+summary: "Contract for `secrets apply` plans: target validation, path matching, and `auth-profiles.json` target scope"
+read_when:
+  - Generating or reviewing `openclaw secrets apply` plans
+  - Debugging `Invalid plan target path` errors
+  - Understanding target type and path validation behavior
+title: "Secrets Apply Plan Contract"
+---
+
+# Secrets apply plan contract
+
+This page defines the strict contract enforced by `openclaw secrets apply`.
+
+If a target does not match these rules, apply fails before mutating configuration.
+
+## Plan file shape
+
+`openclaw secrets apply --from <plan.json>` expects a `targets` array of plan targets:
+
+```json5
+{
+  version: 1,
+  protocolVersion: 1,
+  targets: [
+    {
+      type: "models.providers.apiKey",
+      path: "models.providers.openai.apiKey",
+      pathSegments: ["models", "providers", "openai", "apiKey"],
+      providerId: "openai",
+      ref: { source: "env", provider: "default", id: "OPENAI_API_KEY" },
+    },
+    {
+      type: "auth-profiles.api_key.key",
+      path: "profiles.openai:default.key",
+      pathSegments: ["profiles", "openai:default", "key"],
+      agentId: "main",
+      ref: { source: "env", provider: "default", id: "OPENAI_API_KEY" },
+    },
+  ],
+}
+```
+
+## Supported target scope
+
+Plan targets are accepted for supported credential paths in:
+
+- [SecretRef Credential Surface](/reference/secretref-credential-surface)
+
+## Target type behavior
+
+General rule:
+
+- `target.type` must be recognized and must match the normalized `target.path` shape.
+
+Compatibility aliases remain accepted for existing plans:
+
+- `models.providers.apiKey`
+- `skills.entries.apiKey`
+- `channels.googlechat.serviceAccount`
+
+## Path validation rules
+
+Each target is validated with all of the following:
+
+- `type` must be a recognized target type.
+- `path` must be a non-empty dot path.
+- `pathSegments` can be omitted. If provided, it must normalize to exactly the same path as `path`.
+- Forbidden segments are rejected: `__proto__`, `prototype`, `constructor`.
+- The normalized path must match the registered path shape for the target type.
+- If `providerId` or `accountId` is set, it must match the id encoded in the path.
+- `auth-profiles.json` targets require `agentId`.
+- When creating a new `auth-profiles.json` mapping, include `authProfileProvider`.
+
+## Failure behavior
+
+If a target fails validation, apply exits with an error like:
+
+```text
+Invalid plan target path for models.providers.apiKey: models.providers.openai.baseUrl
+```
+
+No writes are committed for an invalid plan.
+
+## Exec provider consent behavior
+
+- `--dry-run` skips exec SecretRef checks by default.
+- Plans containing exec SecretRefs/providers are rejected in write mode unless `--allow-exec` is set.
+- When validating/applying exec-containing plans, pass `--allow-exec` in both dry-run and write commands.
+
+## Runtime and audit scope notes
+
+- Ref-only `auth-profiles.json` entries (`keyRef`/`tokenRef`) are included in runtime resolution and audit coverage.
+- `secrets apply` writes supported `openclaw.json` targets, supported `auth-profiles.json` targets, and optional scrub targets.
+
+## Operator checks
+
+```bash
+# Validate plan without writes
+openclaw secrets apply --from /tmp/openclaw-secrets-plan.json --dry-run
+
+# Then apply for real
+openclaw secrets apply --from /tmp/openclaw-secrets-plan.json
+
+# For exec-containing plans, opt in explicitly in both modes
+openclaw secrets apply --from /tmp/openclaw-secrets-plan.json --dry-run --allow-exec
+openclaw secrets apply --from /tmp/openclaw-secrets-plan.json --allow-exec
+```
+
+If apply fails with an invalid target path message, regenerate the plan with `openclaw secrets configure` or fix the target path to a supported shape above.
+
+## Related docs
+
+- [Secrets Management](/gateway/secrets)
+- [CLI `secrets`](/cli/secrets)
+- [SecretRef Credential Surface](/reference/secretref-credential-surface)
+- [Configuration Reference](/gateway/configuration-reference)